How do I know if I need a panel upgrade?

Frequent tripped breakers, flickering lights, the need for multiple extension cords, or planning for a new heavy appliance (like an EV charger or new HVAC) are strong indicators that your current panel is overloaded.

How long does a panel upgrade take?

Most residential panel upgrades in Tulsa take a full day to complete. This requires coordination with the utility company to shut off power to your home for several hours while the swap occurs.

Can I just add a sub-panel instead of replacing the main one?

If your main panel has sufficient overall capacity (amperage) but lacks physical space for new breakers, a sub-panel might work. However, if your total power demand exceeds your current service, a full upgrade is necessary.

Electrical Panel Upgrade in Oklahoma

An electrical panel upgrade gives your home the capacity and safety it needs for central air, modern kitchens, EV chargers and additions. We handle 100 to 200 amp service upgrades, like-for-like panel replacements, fuse box conversions, and replacement of problem panels like Federal Pacific and Zinsco, including permits, inspection and utility coordination.

Electrical Panel Upgrades by City

Electrical Panel Upgrade Near You — Choose Your City

Every city below has its own local Electrical Panel Upgrade page with coverage details.

Oklahoma County

Oklahoma City, OK Midwest City, OK Edmond, OK Choctaw, OK Bethany, OK Del City, OK

Tulsa County

Broken Arrow, OK Owasso, OK Tulsa, OK Jenks, OK Collinsville, OK

Canadian County

Yukon, OK Mustang, OK El Reno, OK Piedmont, OK

Tulsa

Sand Springs, OK Bixby, OK Skiatook, OK Glenpool, OK

Cleveland County

Moore, OK Norman, OK Noble, OK

Comanche County

Lawton, OK Fort Sill, OK

Payne County

Stillwater, OK Cushing, OK

Pottawatomie County

Shawnee, OK Tecumseh, OK

Sequoyah County

Sallisaw, OK Muldrow, OK

Carter County

Creek

Cherokee

Pontotoc

Muskogee

Garfield

Rogers

Pittsburg

Stephens

Washington County

Bryan County

Logan County

Jackson County

Grady County

McClain County

Kay County

Ottawa County

Mayes County

Okmulgee County

Woodward County

Wagoner County

Delaware

Texas

Custer

Beckham

Wagoner

Grady

Seminole

Le Flore

Adair County

Planning ahead? Read how much a panel upgrade costs in Oklahoma and panel replacement vs. upgrade.

Technician insight

In Tulsa, the thing that catches most people out with electrical panel upgrades is the condition of the exterior service mast and meter base. In older neighborhoods like the Pearl District, weather exposure from our severe thunderstorms often means the exterior equipment is just as degraded as the indoor panel, requiring a complete service replacement rather than just swapping the indoor box.

Historic Home Panel Modernization in Maple Ridge

A homeowner in Maple Ridge was experiencing constant breaker trips after installing a new HVAC system for the hot Tulsa summer. We found an original 100-amp panel that was completely maxed out and showing signs of thermal damage on the main lugs. We upgraded the system to a modern 200-amp panel, coordinated the disconnect with the utility, and added whole-home surge protection. The home now safely handles the summer cooling load without interruption.

Electrical Panel Upgrade Services We Offer

✓200-Amp Panel Upgrades

Replace outdated 100-amp panels to support modern appliances, HVAC systems, and EV chargers safely without overloading your system.

✓Sub-Panel Installation

Add dedicated circuits for workshops, home additions, or heavy-duty appliances without cluttering or overloading the main breaker box.

✓Fuse Box to Breaker Conversions

Update obsolete and potentially unsafe fuse boxes found in older Tulsa homes to modern, reliable circuit breaker panels.

✓Whole-Home Surge Protection Integration

Install surge protectors directly at the panel to defend your home's electronics against Tulsa's severe thunderstorms and power spikes.

Electrical Panel Upgrade Cost in Oklahoma

Service	Typical Range	What Affects It
100-Amp to 200-Amp Upgrade	$1,500–$3,000	Depends on whether the meter base and weatherhead need replacement.
Sub-Panel Installation	$500–$1,200	Varies by distance from the main panel and the number of required circuits.
Whole-Home Surge Protector Add-on	$250–$500	Cost when added during a panel upgrade.

Ranges are typical for Oklahoma and confirmed with an exact written quote before any work starts.

How it works

1
Initial Load Calculation
We evaluate your home's current and future power needs to determine the correct panel size and ensure safe electrical distribution.
2
Utility Coordination
We coordinate directly with local utility providers in Tulsa County to safely disconnect power to your home during the upgrade process.
3
Panel Removal and Installation
Our electricians carefully remove the old equipment and install the new panel, ensuring all internal connections are secure and up to date.
4
Testing and Labeling
We thoroughly test the new system, verify grounding connections, and clearly label every circuit for your future convenience.

Pricing

Prices vary based on the required amperage, the condition of existing wiring, and whether the exterior service mast needs replacing. We provide clear, upfront quotes before starting any work.